HMI Single End Lamps (other)
Product family benefits
- Extremely uniform light distribution, reduced color or brightness shifts
- Constant daylight color temperature throughout the entire lamp lifetime
- High light output
- Very good color rendering index of Ra> 90 throughout the whole lamp lifetime
- Minimal light scattering
- Optimized filling
Areas of application
- Studio, TV, & Film
- Stage & Theatre
- Professional & High Speed Photography
- Solar Simulation
Safety advice
Because of their high luminance, UV radiation and high internal pressure during operation, HMI lamps may only be operated in enclosed lamp casings specially constructed for the purpose. Appropriate filters must ensure that UV radiation is reduced to an acceptable level. Mercury is released if the lamp breaks. Special safety precautions must be taken. Information on safety and handling is available on request or can be found in the leaflet included with the lamp or in the operating instructions.
Because of their high luminance, UV radiation and high internal pressure during operation, HMI lamps may only be operated in enclosed lamp casings specially constructed for the purpose. Appropriate filters must ensure that UV radiation is reduced to an acceptable level. Mercury is released if the lamp breaks. Special safety precautions must be taken. Information on safety and handling is available on request or can be found in the leaflet included with the lamp or in the operating instructions.
Information about Family
The HMI single-end lamp family continues to offer the best in HMI quality. In addition to the DIGITAL line, these single end HMI lamps offer consistent 6000K color and >90 CRI. HMI Lamps ≥ 6000W are also designed with a unique round moly-foil that more evenly distributes heat and current, providing lamp life increases of 25% on average.
UVS (UV stop)
Drastically reduced UV emissions for protection of paint and extended fixture lifeTighter range of color temperature
For a stable CCT with reduced color and brightness shiftsHeat resistance
For high thermal requirements during the showProducts
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
HMI 2500 W/SE XS
|
2500 W | 115 V | 25.6 A | 240000 lm | 500 hr | ||
|
|
HMI 4000 W/SE XS
|
4000 W | 200 V | 24 A | 380000 lm | 500 hr | ||
|
|
HMI 12000 W/SE XS
|
12000 W | 160 V | 75.00 A | 1150000 lm | 500 hr |
