TYREinflate 200 OTI200
Rapid tyre inflator with wind-up cable
The OSRAM Tyreinflate 200 analogue tyre inflator inflates a 13” tyre from flat in up to 4.5 minutes**. It has a large on/off button for easy use. Its stable design keeps the inflator still while in use.
Powered from an in-car 12V socket, the Tyreinflate 200's long 3m power cable makes reaching all the tyres around the vehicles easier. Shows pressure readings in kPA, bar and PSI. Includes storage compartment for tyre valve caps when being used.
Comes with three-piece adaptor set for use with bicycle tyres, motorcycle tyres, balls and other inflatables.
**based on inflating a 13” tyre from flat to 2.41 BAR
Powered from an in-car 12V socket, the Tyreinflate 200's long 3m power cable makes reaching all the tyres around the vehicles easier. Shows pressure readings in kPA, bar and PSI. Includes storage compartment for tyre valve caps when being used.
Comes with three-piece adaptor set for use with bicycle tyres, motorcycle tyres, balls and other inflatables.
**based on inflating a 13” tyre from flat to 2.41 BAR
Rapid Inflation Time
Inflate the tire to the desired pressure in ca. 4.5 minutes**Wind-up Cable
Winding/unwinding mechanism for a neatly rolled up cableIncluding three-piece adaptor kit
To inflate bicycles, balls and other inflatablesTechnical Data
Product information
Display Size
50 mm
Measuring Units
PSI, kPa, bar
Accuracy (bar)
±0.1 bar
Flow rate (l/min)
tbc
Inflation time
4.5 min
Max Pressure
5.5 bar
Air Hose Length
50 cm
Power Cord Length
3.0 m
General Product Information
Global order reference
OTI200
Electrical Data
Power Source
12 V Fused Plug
Operating Voltage
12 V
Nominal voltage
11.1 V
Nominal wattage
120.00 W
Physical Attributes & Dimensions
Height
180.0 mm
Length
197.0 mm
Width
79.0 mm
Operating Conditions
Noise Level (dB)
90 dB
Additional product data
Recommended to Use With
Car, Bicycle
Display Type
Analogue
Capabilities
Fuse
10 A
Accessories
Adaptors for: Balls, Air Mattress, Bikes
Environmental & Regulatory Information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of declaration
06-11-2024
Candidate list substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe use instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration no. in SCIP database
2c7125da-b121-4f3d-8c54-1fc45a571265|91681add-0e23-41d1-a9d2-68596b3c0670
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899620209 |
FS
| 1 | 186mm x 83mm x 203mm | 790.00g | 3.13dm³ |
| 4062172166515 |
VS
| 4 | 351mm x 206mm x 238mm | 3462.00g | 17.21dm³ |