XBO ≤ 450W Double End

Product family features
  • Color temperature: approx. 6,000 K (Daylight)
  • High color rendering index: Ra > 95
  • Continuous spectrum in the visible range
  • High arc stability
  • Hot restart capability
  • Dimmable
  • Instant light on starting
Product family benefits
  • Very high luminance (point light source)
  • Continual color quality, irrespective of lamp type and lamp wattage
  • Constant light color throughout the life of the lamp
  • Long lamp life
Areas of application
  • Endoscopy
  • Microscopy
  • Surgical Headlamps
  • Fiber Illumination
  • Solar Simulation
  • Imaging & Scanning
Safety advice
Because of their high luminance, UV radiation and high internal pressure in both the hot and cold state, XBO lamps must only be operated in appropriate enclosed casings. Always use the protective jackets supplied when handling these lamps. They may only be used as open lamps if appropriate safety measures are taken. More information is available on request or can be found in the leaflet included with the lamp or the operating instructions.

Information about Family

XBO xenon short arc discharge lamps (≤450W) are intense point sources that provide a broad, continuous spectrum and have a near perfect color rendering in the visible range with CRI greater than 95. This makes them an ideal choice for fiber illumunation devices for Medical, Scientific, and even Industrial areas. In particular, surgical devices benefit greatly from the accurate color rendering and intense beam of the XBO light source. ams OSRAM has been producing reliable, high quality XBO lamps for over 70 years.​

Products

Sort by:
Product
Nominal wattage
Lamp voltage
Lamp current
Type of current
Cooling
Data sheet
XBO 75 W/2
75 W 12…16 V 4.9…5.9 A DC Convection
XBO 75 W/2 OFR
75 W 12…16 V 4.9…5.9 A DC Convection
XBO 100 W OFR
100 W 12.8…14.4 V 7.0…7.4 A DC Convection
XBO 150 W/4
150 W 17…21 V 7.5 A DC Forced
XBO 150 W/1
150 W 17…21 V 7.5 A DC Forced
XBO 150 W/CR OFR
150 W 15…18 V 8.5 A DC Forced

Downloads